SLIDING DOORS
Door Frame: It is produced in two different types, in Plastic and Aluminium. There are special plastic additions in both options to prevent thermal bridge, and inside casing is made of aluminium. Sliding doors are produced to be mounted on both the panel and the door.
Wing: This is produced without using any wooden material and by injecting polyurethane with a density of 40 kg / m³ ( +2 ) between two sheets.
Thickness: 92 mm in regular cold rooms and 120 mm in deep freezer cold rooms.
Surface Sheet: Both surfaces of the wing is made in polyester sheet (POLY) in standard production. It can be produced in PVC and CRNI, if requested, and can be produced in some standard colors for PVC surfaces.
Thermal Bridge: The thermal bridge have a single line of special rubber joint surrounding and sealing the door wing in regular cold rooms. There is an easy-to-change heater (heating coil) in the frame of deep freezer cold room doors.
Suspension System: Carrier rails, wheels, holding arms and required accessories are made of composite material and stainless steel in accordance with international standards.
Safety: Doors can easily be opened from the inside for safety purposes, and alarm-warning system can be installed, if requested.
Measurements: It is not produced in standard measurements, and can be be produced in special measurements optionally.