HINGED DOORS


Door Frame: It is produced in three different types as Mounted on the Panel, Plastic and Aluminium. There is no problem and it saves time during assembly due to the fact that door frames are mounted to the panel. Plastic and Aluminium frames are produced in a way to ensure mounting them on the panel and wall.

Wing: This is produced without using any wooden material and by injecting polyurethane with a density of 40 kg / m³ ( +2 ) between two sheets.

Thickness: 68 mm in regular cold rooms and 92 mm in deep freezer cold rooms.

Surface Sheet: Both surfaces of the wing is made in polyester sheet (POLY) in standard production. It can be produced in PVC and CRNI, if requested, and can be produced in some standard colors for PVC surfaces.

Thermal Bridge: The thermal bridge have a single line of special rubber joint surrounding and sealing the door wing in regular cold rooms. There is an easy-to-change heater (heating coil) in the frame of deep freezer cold room doors.

Lock: Door locks are produced in accordance with international standards and they can be opened from the inside when they are locked from the outside. The antipanic arm used on these doors have phosphorescent paint.

Hinge: The hinges used in producing the doors are two way adjustable, vertical and horizontal. Thus, the door elevates when it is opened to reduce rate of friction with the floor.

Measurements: hinged doors can be produced in maximum 1200 X 2000 mm net threshold measurements, and can be specially produced in smaller measurements optionally



Contact Us;